-
NOTE: For cutting tool sharpening services, see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining. SHIS terminology: The 751.2 is used on EC30 headtubes. If used on the EC29 headtube, it will ream it up to the EC30.
-
NOTE: For sharpening services of cutting tool see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining. SHIS terminology: The 754.2 is used on EC34 upper or lower headtubes.
-
NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining. SHIS terminology: The 756s is used for IS41 lower and upper headtubes.
-
SHIS terminology: The 768 is used for ZS44 and EC44 lower and upper headtubes. NOTE: For sharpening services of cutting tool see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining.
-
NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining. SHIS terminology: the 788 is used for upper or lower headtubes that accept the ZS44 or EC44 headsets.
-
NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining. SHIS terminology: The 690 faces headtubes in the EC29, EC30, EC34 and EC37 standards.
-
- 1.9516-inch (49.57mm) diameter reamer
- 2.441-inch (62mm) facer
- Bores a machined surface to a depth of approximately 25mm and then faces top of headtube surface
-
NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining. SHIS terminology: The 789 is used for upper and lower head tubes accepting the ZS56 or EC56 headsets.
