Ship via UPS
-
Shipping weight: 13.65 lbs. Shipping dimensions: 17.25" L x 10.25" W x 9.5" H
KIT INCLUDES:
- ATD-1.2 Adjustable Torque Driver
- BO-2 Bottle Opener
- CC-4 Chain Checker
- CM-5.2 Cyclone™ Chain Scrubber — Instructions
- CN-10 Professional Cable and Housing Cutter — Instructions
- CNW-2 Chainring Nut Wrench — Instructions
- CT-3.3 Chain Tool — Instructions
- DCW-1 Double-Ended Cone Wrench: 13/14mm
- DCW-2 Double-Ended Cone Wrench: 15/16mm
- DCW-3 Double-Ended Cone Wrench: 17/18mm
- FR-5.2 Cassette Lockring Tool
- GP-2 Pre-Glued Super Patch Kit — Instructions
- GSC-1 GearClean™ Brush
- HXS-1.2 Professional L-Shaped Hex Wrench Set
- MLP-1.2 Master Link Pliers — Instructions
- PAW-12 12" Adjustable Wrench
- PW-5 Home Mechanic Pedal Wrench
- RR-12 Tape Measure
- SD-2 #2 Phillips Screwdriver
- SD-3 3mm Flat Blade Screwdriver
- SR-12.2 Sprocket Remover / Chain Whip: 5 to 12-Speed Compatible
- SW-0 Precision Spoke Wrench: .127" — Instructions
- SW-2 Precision Spoke Wrench: .136" — Instructions
- TB-2 Emergency Tire Boots — Instructions
- TL-1.2 Tire Lever Set — Instructions
- TWS-3 Torx® Compatible 3-Way Wrench
- VC-1 Valve Core Tool
-
- Custom designed tool-holding pallets with loops and pockets
- Folding, dual-sided pallet wings
- Front tool pallet that stores securely inside during transport
- Dent-proof composite shell built around an aluminum frame
- Key lock
- Nominal dimensions: 19.5" x 16.9" x 8.5" (49.5cm x 43cm x 21.5cm) 13.2 lb (6kg)
-
- Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm)
- The clamp jaws are nominally 4 inches (10cm) wide
- Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface
- Clamp rotates 360 degrees
- Heavy gauge steel tubing
- Chrome plated for durability
-
- The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes
- The clamp jaws are nominally 2.75 inches (7cm) wide
- Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface
- Clamp rotates 360 degrees
- Heavy gauge steel tubing
- Chrome plated for durability
-
- PCS-4-1 uses the 100-5C Adjustable Linkage Clamp
- Clamp rotates 360º
- The clamp jaws are nominally 4 inches (10cm) wide
- Clamping height adjusts quickly from 51" to 68"
- Base forms a 26½" x 28" square (67 cm x 71 cm)
- Weighs 26 lbs. (11.8 kg)
-
- The PCS-4-2 uses the 100-5D Micro-Adjust Clamp
- Clamp rotates 360º
- The clamp jaws are nominally 2.75 inches (7cm) wide
- Adjusts quickly from 51" to 68"
- Base forms a 26½" x 28" square (67 cm x 71 cm)
- Weighs 26 lbs. (11.8 kg)
-
- Easily height adjustable from 50" to 62" (128–158cm) utilizing our proven Lock Block System
- Includes #105 cast aluminum work tray
- Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm)
- The clamp jaws are nominally 4 inches (10cm) wide
- The maximum weight holding capacity of the PRS-3.2 is 120 lbs. (54kg)
-
- Easily height adjustable from 50" to 62" (128–158cm) utilizing our proven Lock Block System
- Includes #105 cast aluminum work tray
- The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23–76mm), including aero tubes
- The clamp jaws are nominally 2.75 inches (7cm) wide
- The maximum weight holding capacity of the PRS-3.2 is 120 lbs. (54kg)
-
- Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm)
- Durable replaceable clamp covers (#468B)
- Clamp has reliefs on both jaws for cable routing
- The clamp jaws are nominally 4 inches (10cm) wide
- Center of clamp is 14.5" from mounting surface
- Wall mounting plate is 6 inches by 2.5 inches (approx. 15cm x 6cm).
- Mounting holes are approximately one-half inch in diameter and are on 4-inch centers (100.2mm).
- Mounting bolts not included.
-
- The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes
- Cam-actuated adjustment system for quick entry, adjustment and exit
- Fully adjustable clamping pressure prevents damage to thin-walled tubes
- Narrow clamping jaws (2.7"/7cm) designed to clamp securely yet fit into tight areas or on short seat posts
- Durable replaceable clamp covers (#1960)
- Center of clamp is 13" from mounting surface
- Wall mounting plate is 6 inches by 2.5 inches (approx. 15cm x 6cm).
- Mounting holes approximately one-half inch in diameter and are on 4-inch centers (100.2mm).
- Mounting bolts not included.
